Marine Tube Condensing Unit
Shell and Tube Evaporator and Condenser
1, the heat transfer area is wide: the cooler of the heat pipe with copper pipe design, the contact area is
wide, so the heat transfer effect than the average smooth heat transfer tube to high.
2, good heat transfer: This series of copper tube is directly rotary copper processing, so that the
integration of heat transfer tube, so good heat transfer and indeed, there is no loss of solder joints
caused by poor heat transfer.
3, can be suitable for large flow: reduced number of heat transfer tubes, the use of smooth fluid area
increases, and can prevent the pressure loss. Inside with a baffle guide flow, can produce bending flow,
growth process, play a role.
4, a good heat transfer tube: good thermal conductivity of 99.9% copper, the most suitable for the cooling
of the cooling tube.
5, no oil: the board and the body with the integration of the design, you can avoid water and oil mixed with
the troubles at the same time in the factory before the airtight test is indeed close, it can achieve the
purpose of leakage.
6, easy assembly: foot can be free to turn 360 degrees, for the body to replace the direction and angle of
the assembly, through the foot can be directly welded in the machine or tank any location, both
convenient and simple.
7, spiral guide plate to guide the oil into a spiral continuous uniform flow, to overcome the traditional
folding heat generated dead ends, high heat transfer efficiency, pressure loss.
8, the flow of two processes and four processes, the flow of large flow (baffle large lead) small flow (baffle
small lead), variety, to meet the various requirements.
STRAIGHT SINGLE SERIES DRY SPIRAL BAFFLE PLATE EVAPORATOR
CAPACITY: 750KW TO 1500KW
Qn-rated refrigerating capacity Wn-cooling water flow Wm-maximum cooling water flow
Dpn-pressure drop of recirculating cooling water Dts-overheat temperature
U SHAPED TUBE DRY EVAPORATOR (DOUBLE CIRCUIT)
CAPACITY: 120KW TO 310KW
CONDENSER SERIES SINGLE MACHINE CAPACITY: 110RT TO 200RT
P (fluoride inlet)
Copper pipe diameter (inch)